0.625×1.125×0.375 inch HIGH PRESSURE Nitrile Rubber Double Lip Rotary Shaft Oil Seal with Garter Spring TCN1

N1..11 Nitrile Pressure Resistant Oil Seals: Oil seals are used in a variety of different applications in which a rotating shaft is lubricated by oil or grease. They are engineered to facilitate the smooth operation of your equipment, serving as a barrier to prevent the leakage of oils and greases while also keeping foreign substances from entering. TCN1, TCN11 and TDN1 type seals feature a special design of the short flex section and special material and structural designs making these oil seals best suited for high-pressure applications. These types feature a sealing nitrile rubber lip on the inside diameter as well as an external dust lip. These oil seal types feature a garter spring which allows some give to prevent a build-up of friction. (Seals under 5mm width may not always feature a spring.) Benefits: Excellent wear resistance, good running properties, high resistance to chemicals and petroleum-based fuels including petrol, diesel and LPG. – High Quality 15.88mm = 0.625 (5/8) inch 28.58mm = 1.125 (1-1/8) inch 9.53mm = 0.375 (3/8) inch TCN1 Black Nitrile Need Viton Seals? Replacement Rotarty Shaft Seal Springs? Repair Shaft Sleeves? Adhesives?